Home | About Biaoqi | News | Product | Contact | 中文

Contact an Biaoqi Applications Scientist

 
Product List
QSpec
OceanOpticsSpectrometer
Light Sources
New Product
* PL-3000 Photoluminescence Spectrometer
* GLIS-3000 GEM Luminous Imaging 
* bluLoop Multi-LED Light Source
* HL-2000 Tungsten Halogen Light 
* LS-1 Tungsten Halogen Light So
* DH-2000 Deuterium Tungsten Halogen&
* Balanced Deuterium Tungsten Halogen
* Miniature Deuterium Tungsten Haloge
* D-2000 Deuterium Light Sources
* High-powered Continuous-wave Xenon 
 
Product

OceanOpticsSpectrometer>> Oxygen Sensors System>>NeoFox Sport Oxygen Sensors System  

NeoFox® Sport Phase Measurement Systems


Say Goodbye to Limitations and Hello to NeoFox Sport

This portable, handheld optical oxygen sensor is designed specifically for measuring dissolved and gaseous oxygen pressure in a variety of media. The NeoFox Sport sensor uses a proprietary sol-gel coating that is embedded with an oxygen indicator and can be applied to patches or probes. These coating formulations are available for general laboratory use, high-sensitivity applications and hydrocarbon-rich sample environments.

NeoFox Sport is a fluorescence-based optical oxygen sensing system that includes a phase fluorometer, an onboard microprocessor with low-power OLED display, a user interface and a battery pack for convenient field use. The NeoFox Sport, combined with a probe or patch based sensor, is the perfect solution for field portable oxygen sensing. Probes, patches and accessories are priced separately.

Fully configured systems start at under $4,000.

The user interface allows you to set single- or multi-point calibration and display oxygen readings in percent of oxygen, partial pressure, moles per liter and more.

Unlike polarographic and galvanic oxygen meters, the NeoFox Sport sensor is immune to environmental changes in pH, salinity and ionic strength. Plus, NeoFox Sport eliminates the need for frequent calibration.

Ready to learn more? Contact an Ocean Optics Applications Scientist here.

Electronics Specifications:

Dimensions: 327.6 mm x 190.5 mm x 66.5 mm
Weight: 928 g
Principle: Photoluminescence quenching using a ruthenium compound: sensor measures O2 partial pressure
Parameters measured: Luminescence phase shirt, AC luminescence intensity temperature (via optional external thermistor) and pressure (via onboard pressure transducer)
Sensor coating formulations (sol gel embedded dyes): General purpose (FOXY), high-sensitivity (FOSPOR) and hydrocarbon-ready (HIOXY)
Media: Gases and liquids
Communications: USB, analog out
External Power Supply Voltage
  Minimum
  Typical
  Maximum

4.75V
5.0V
5.1V
Total Power Consumption
  (5V External Power, Charging, Typical)

6W
Total Power Consumption
 (5V External Power, Not Charging, Typical)
3.1W
Total Power Consumption
  (3.3V Battery Power, Typical)

3.3W
NeoFox Modular Power Consumption
  (3.3V Battery Power, Typical)

2.5W
Battery Life, Typical 3 Hr
Data Logging Rate, Maximum 1 Hz
4-20mA Output Accuracy at 25 ºC + 160 µA
0-5V Output Accuracy at 25 ºC + 50 mV
Electronics Operating Temperature
  Minimum
  Maximum

0 ºC
55 ºC
 
版权所有 2007 广州标旗光电科技发展股份有限公司 www.gzbiaoqi.com
地址:广州市黄埔区彩频路7号701-1房
电话:(020)38319602 38319620 传真:(020)38319595 ICP备案:粤ICP备16049535号