Home | About Biaoqi | News | Product | Contact | 中文

Contact an Biaoqi Applications Scientist

 
Product List
QSpec
OceanOpticsSpectrometer
Light Sources
New Product
* PL-3000 Photoluminescence Spectrometer
* GLIS-3000 GEM Luminous Imaging 
* bluLoop Multi-LED Light Source
* HL-2000 Tungsten Halogen Light 
* LS-1 Tungsten Halogen Light So
* DH-2000 Deuterium Tungsten Halogen&
* Balanced Deuterium Tungsten Halogen
* Miniature Deuterium Tungsten Haloge
* D-2000 Deuterium Light Sources
* High-powered Continuous-wave Xenon 
 
Product

Light Sources>> Wavelength Calibration Sources>>AR-1 Argon Calibration Source for VIS-NIR  

AR-1 Argon Calibration Source

Argon Lines from 696-1704 nm


The AR-1 Calibration Source is a spectral wavelength calibration source specifically designed for NIR spectrometers like our NIR256 and NIR512 models. The AR-1 produces low-pressure argon emission lines from 696-1704 nm for use in performing fast, reliable spectrometer wavelength calibrations. The spectral emission lines are printed on the lamp's housing.

Our spectrometers are carefully calibrated as part of our standard quality assurance process. However, as is the case with all spectrometers, wavelength will drift slightly due to time and environmental conditions. With the AR-1, you can recalibrate your spectrometer using a spreadsheet program such as Microsoft Excel or a calculator that performs third-order polynomial regressions.

If wavelength accuracy is an important part of your work, consider including calibration spectra with every experiment.

The AR-1 operates with a 12 VDC power supply (included) or a 9V battery (not included) for field use. The AR-1 features an SMA 905 connector for interfacing to optical fiber assemblies.

Specifications

Output:

Low-pressure gas discharge lines of mercury and argon

Spectral range:

696-1704 nm

Dimensions (in mm):

125.7 x 70 x 25.8

Weight:

40 g

Power consumption: 250 mA at 12 VDC

Power requirements:

12 VDC wall transformer (included) or
9 VDC battery (additional)

Internal voltage:

600 volts at 30 kHz

Bulb life:

~ 3,500 hours (at 20 mA)

Amplitude stabilization:

~1 minute

Aperture:

3 mm

Connector:

SMA 905

Spectral Output

Cuvette Wavelength Calibration Adapter


The PS-HG1-ADP Wavelength Calibration Adapter is a 1-cm square fixture that fits into a 1-cm pathlength sample chamber and connects to the AR-1 via optical fiber. (Neither wavelength calibration standard or fiber is included). The adapter is designed for performing a wavelength calibration for any spectrometer and 1-cm cuvette holder system, whether it's designed by Ocean Optics or another manufacturer.

The PS-HG1-ADP retails for around $300.

 
版权所有 2007 广州标旗光电科技发展股份有限公司 www.gzbiaoqi.com
地址:广州市黄埔区彩频路7号701-1房
电话:(020)38319602 38319620 传真:(020)38319595 ICP备案:粤ICP备16049535号